Ford 100E ENGINE REBUILD

ENGINE REBUILD
THE BRIEF

The engine was smoking and knocking, please can you investigate to find out why and what needs to be done to fix this.

WHAT WE DID

On inspection it became apparent that the engine had been abused in an earlier life, lack of oil changes, over revved and over-heated. We fully stripped the engine and cleaned it all out. Once clean we could see the full extent of the damage and therefore the following was carried out to rejuvenate the engine:

  • Acid cleaned engine
  • Re-bore, new pistons and rings
  • Crank re-grind
  • Unleaded valve and seats fitted with new valves
  • Converted con-rods with new shells
  • Lightened flywheel
  • Balanced crank flywheel and pulleys
  • Head & Block skim
  • New inlet tubes installed
  • Re-assembled with new oil pump, timing chain and accessories
DAMAGE TO BIG ENDS
PARTIALLY CEASED PISTON WITH STUCK IN RINGS
METAL SHAVINGS FROM DAMAGED ENGINE IN SUMP
ENGINE RE-ASSEMBLY IN PROGRESS
ENGINE ASSEMBLED & PAINTED WAITING FOR HEAD
ENGINE BENCH TESTING
ENGINE INSTALLED INTO BAY